基于粗糙基的高超声速进气道起动/不起动分类方法研究

进气道起动/不起动状态检测是高超声速进气道研究的重要内容,它是进气道保护控制的基础和前提.针对这一问题,对高超声速进气道进行了不同边界条件下的二维稳态流场数值模拟.提出了利用粗糙集方法对进气道的测点进行约简处理,得到了进气道起动/不起动的分类准则,对分类准则进行了内在的物理机制分析,并利用其它工况数据对判断准则进行了验证.验证结果表明了分类准则的正确性.     

一种快速求解整周模糊度的方法

针对FARA方法搜索整周模糊度组合数比较大,LAMBDA方法需要浮点解精度比较高的缺点,提出一种求解GPS载波相位测量整周模糊度的分步法。用LAMBDA方法搜索出来的整周模糊度作为FARA方法的初始解,进而用FARA方法解算出它的最终解。实验结果表明,该方法能缩短搜索整周模糊度的时间,快速准确地确定整周模糊度。     

声重波激发的赤道Spread—F的拓扑特性研究

本文对声重波激发的Spread-F扰动的非线性制约方程的拓扑特性进行了定性讨论和数值计算．研究了Spread-F的混沌特征及参数范围．结果表明声重波在不同条件时对Spread-F的激发作用有本质的不同．     

SPACE LIFE SCIENCE IN 2000-2001

Chinese scientists studied some of the problems in the field of space life science and achieved success in the area during 2000-2001. Space biological experi ments were carried out in the orbit and the results of ground studies on protein crystallization, space radiation, space motion sickness were introduced in this paper. The influences of simulated weightlessness on the brain-function, the car diovascular, endocrine hormones, immunity, skeletal and muscle systems were presented. In addition, gravity medicine and space environment medicine, as well as countermeasures to space deconditioning, such as the traditional Chinese medicine, were also reported.     

KuaFu Mission

The KuaFu mission-Space Storms, Aurora and Space Weather Explorer-is an "L1+Polar" triple satellite project composed of three spacecraft: KuaFu-A will be located at L1 and have instruments to observe solar EUV and FUV emissions, and white-light Coronal Mass Ejections (CMEs), and to measure radio waves, the local plasma and magnetic field,and high-energy particles. KuaFuB1 and KuaFu- B2 will bein polar orbits chosen to facilitate continuous 24 hours a day observation of the north polar Aurora Oval. The KuaFu mission is designed to observe the complete chain of disturbances from the solar atmosphere to geospace, including solar flares, CMEs, interplanetary clouds, shock waves, and their geo-effects, such as magnetospheric sub-storms and magnetic storms, and auroral activities. The mission may start at the next solar maximum (launch in about 2012), and with an initial mission lifetime of two to three years. KuaFu data will be used for the scientific study of space weather phenomena, and will be used for space weather monitoring and forecast purposes. The overall mission design, instrument complement, and incorporation of recent technologies will target new fundamental science, advance our understanding of the physical processes underlying space weather, and raise the standard of end-to-end monitoring of the Sun-Earth system.     

钛合金焊接件疲劳特性评估的当量Kt法

针对先进飞机结构广泛采用的钛合金焊接结构,提出了描述焊接件疲劳特性的当量理论应力集中系数Kt(K_te)的概念;建立了以钛合金材料疲劳性能为基础,通过一组谱载下钛合金焊接件疲劳试验来确定K_te的技术途径.以TC4钛合金氧弧焊试件为例给出了确定K_te的具体方法和结果.     

2000年4月6-8日磁暴期间电离层TEC观测研究

利用北京、乌鲁木齐、武汉GPS观测数据计算的垂直总电子含量，分析了发生于2000年4月6-8日磁暴期间观测区域的电离层状态。结果表明，在4月7日北京时间0200-0700之间，在中、低纬地区出现了较弱的电离层负相暴，与前一日相比，最大TEC之差在-8TECU左右；在北京时间0700之后，在较高纬度地区开始出现强列的电离层负相暴，并且该负相暴随着时间逐渐增强；但在北京时间0700-0900之间，在低纬地区出现了电离层正相暴。在定时间内较高纬度地区的负相暴逐渐增强并向南移动而低纬地区的正相暴经历了增强到减弱的过程。     

Advances in the Studies of the Middle and Upper Atmosphere in 2004 - 2006

This paper summarizes the research results obtained by Chinese scientists and/or through international collaborations during 2004 to 2006. Within the context of COSPAR, the progresses in the studies of the middle and upper atmosphere in China in the past two years are introduced with focusing the developments in facilities and instruments, and the advancements in scientific issues, e.g., dynamics related processes, atmospheric constituents, and the coupling with the lower atmosphere.     

含硼富燃料推进剂燃烧机理研究

分析了AP包覆硼对含硼富燃料推进剂低压燃烧的影响。通过微热电偶测温和火焰单幅照相技术分别测试含硼富燃料推进剂燃烧波温度分布及燃烧火焰结构；根据气相温度变化的趋势，把该推进剂的气相区燃烧又分为三个子区，并给出了三个子区的厚度，分析了各区温度变化趋势不同的原因。用扫描电镜对熄火表面形貌进行观察，并通过能谱仪进行局部元素分析；该推进剂中断燃烧熄火纵向剖面的实验表明，该推进剂的燃烧表面存在“沉积层”；分析认为该“沉积层”由硼、积炭和少量的三氧化二硼组成，且基本惰性。燃面上“沉积层”的厚度与温度分布曲线中燃面上气相区的厚度基本一致，认为该推进剂的气相反应在燃面上的惰性“沉积层”中进行。     

虚拟现实技术在飞行器级间分离仿真中的应用

主要讨论应用虚拟现实技术进行飞行器级间分离仿真分析的方法。给出了飞行器级间分离仿真时用于控制飞行器模型运动的虚拟世界结构，并且据此建立了一个包括飞行器模型和场景模型的虚拟世界。基于Matlab和Simulink，还给出了将虚拟世界与其它的计算程序结合起来的方法，实现计算、仿真、显示一体化。基于此框架，通过流体力学、飞行力学计算以及级间相对姿态和位置的计算和分析．研究讨论了飞行器级间分离碰撞干扰问题，为级间分离方案和分离机构设计提供了依据。